Before you dip-strip an old Edinburgh door

Understand what to check before choosing dip-stripping for an old door.

Keep the character you love in an old door

Renovation guidance

By Brunon Rogowski, founder of Sweet Homes

Then it dries

The door comes back without its layers of paint. The grain is visible, the edges are sharp and it photographs well.

I have seen stripped doors split, twist and open at the joints. Sometimes the timber is ordinary, patchy softwood rather than the even board the owner had in mind.

I have not followed every door through careful neutralising, controlled drying and prompt refinishing. My experience does not prove that every competent stripping job fails. It is enough for me to ask what happens after the tank, not only what the door looks like when it comes out.

Was the door meant to be bare?

The Society for the Protection of Ancient Buildings (SPAB) notes that old softwood doors were generally intended to be painted. Its guidance on old doors also warns that stripping can raise the grain and soften glue.

Traditional doors are assembled from rails, stiles, panels and glued joints. SPAB’s guidance for timber windows says joinery should not be immersed in caustic soda because it can deform timber and weaken joints. A door is not a window, but I would take that warning seriously before immersing another piece of assembled old joinery. The SPAB repair note sets out the concern.

Once it is back in the flat, the timber continues to exchange moisture with the surrounding air. The Forest Products Laboratory explains how wood moisture follows relative humidity and temperature, while coatings slow rather than stop the exchange. The Wood Handbook covers the material behaviour.

A tenement door may have a warm room on one side and a cooler common stair on the other.

Before choosing a stripping method

Ask a joiner used to repairing old doors to assess the timber, joints and existing finish before deciding how to remove the paint. Discuss the result you want and whether retaining a painted finish would suit the door. SPAB’s guidance on old doors is a useful starting point for that conversation.

If you use a stripping specialist, ask how they assess the door and handle neutralising, drying and refinishing. Agree what happens after it comes back, including any repairs and the intended finish. A freshly stripped surface is only part of the decision.

What safety checks come before stripping old paint?

Old paint may contain lead, particularly in buildings dating from before the early 1980s. Stripping, dry sanding and heating old coatings can release hazardous dust or fumes. Have the coating and proposed method assessed before disturbing it. Sound paint may be safer left in place and prepared for a new finish; damaged paint needs a controlled removal method. Ask the door-stripping specialist to explain the controls for the actual door.

Read the source guidance

Why does a caustic stripping method need care?

Caustic soda is sodium hydroxide, a corrosive substance that can burn skin and eyes. Ask the stripping specialist which chemicals they use and how they control handling, residue and drying before refinishing. This is a reason to check the method carefully, not a home mixing or neutralising instruction.

Read the source guidance

Can every original door be stripped or altered?

An entrance door may form part of the building’s fire-safety arrangements. Its frame, glazing, fittings and condition can all matter to its performance. Ask a competent door or fire-safety specialist to check the required performance and suitability before stripping or altering it.

Read the source guidance

When should the fit be adjusted after stripping?

Agree drying and refinishing with the stripping specialist and joiner. Let the stripped door settle before deciding whether its fit needs adjustment; do not cut the frame simply to compensate for a door that has not finished drying.

Assess the door before choosing a stripping method

An old door is an assembly of timber pieces and joints, rather than a solid sheet. Its condition, previous repairs and layers of finish matter when deciding how to prepare it. Removing paint aggressively can expose problems as well as alter the surface you hoped to retain.

Work out the intended finish before choosing a method. A door that is to be painted again does not necessarily need every trace of old coating removed. Sound preparation and a suitable finish can be a different task from exposing bare timber for a clear finish.

If the door no longer fits properly

A door that binds or has opened joints after stripping needs an assessment of its condition before more material is removed. Planing an edge immediately can make a later repair harder if the underlying problem is movement or a weakened joint.

If the wider room also needs fitted furniture, explore our bespoke joinery service.

Keep the door, frame and hardware in the same assessment. Check where the door catches and whether the frame or hinges are contributing. Treating every fitting problem as an oversized door risks removing original material without resolving the cause.

Before finalising allowances for unseen work, read hidden risks in older-home renovations.

Customer feedback

What our customers say

4.9/5 from 130+ combined reviews

Google and Edinburgh Trusted Trader